| Specification |
|
KSX1000 |
KSX700 |
KSX550 |
| Maximum push and pull force |
|
1000N |
700N |
550N |
| Nominal force |
|
150N |
| Drive system |
|
Interchangeable; chain or ultra quiet and maintenance-free
toothed cable or belt drive
|
| Operator programming |
|
3 buttons and double digit numerical display on motor head |
| Diagnostic display |
 |
Double digit numerical display on motor head |
| Courtesy light |
|
240V-40W (E14) lighting
Time adjustable (2 - 240sec.)
|
240V-40W (E14) lighting. 180 sec. |
| Automatic safety cut-out |
|
Automatically learned for both open and close direction.
Monitored and adjusted each cycle |
| Push and pull force limit |
|
Automatic set and adjustable for both open and close direction |
| Force 'offset' sensitivity |
|
Automatic set and adjustable for both open and close direction |
Programmable safety
reverse |
|
Short or full door reverse |
| Open and close door position settings |
|
Electronically set and monitored with patented reference switch system.
No mechanical excess travel stop required |
| Programmable Intermediate door position |
|
Yes
|
- |
| Operator Speed |
|
Adjustable (maximum 140mm/sec) for both open and close direction |
| Soft" start / "Soft" stop |
|
Adjustable ; "Off" / 200mm / 300mm / 400mm |
| Automatic closing |
|
Adjustable (0-255 sec.) |
0 or 30 sec. |
Quick Program
automatic closing |
|
Preset automatic closing values |
| Photocell |
|
Class 3 self monitoring |
Closing edge
safety device |
|
Can be connected |
| Programmable Impulse type |
|
Yes |
| External warning light |
|
Can be connected via optional in- or external relay |
| Additional lighting |
|
Can be connected via optional relay with equal time as courtesy light |
- |
| Door open position signaling |
|
Can be connected via optional relay |
- |
| Door closed position signaling |
|
Can be connected via optional relay |
- |
| Electronic back drive (burglary) detection |
|
Automatic door closure when a 10mm motor back drive is detected |
| Factory reset |
|
Yes |
| Remote control |
|
2 x 868MHz. 4-button mini transmitters
with wall holder and visor clip |
| Transmitter coding |
|
Digital multi-bit fail safe system with more than 268 Billion codes. |
| Motor |
|
DC self inhibiting worm gear motor with RPM sensor
Transformer with thermal overload protection
Short-term duty: KB2min. IP20 protection; for dry rooms only |
| Mains |
|
230 / 240 V/AC, 50Hz., with CEE phase changer plug |
| Stand-by consumption |
|
Approx. 3.9W |
| Dimensions (W x H x D) |
|
Operator head KSY: 19.7 x 15 x 37.5 cm.
Operator head KSX: 19.7 x 13.5 x 36.8 cm.
Carton dimensions: 25 x 17 x 50 cm. |
| Headroom required |
|
30mm (35mm with rail clamp) |
| Chain / Toothed Cable / Belt relief |
|
Automatic / adjustable |
| Interchangeable boom |
|
1-piece pre-assembled or 2-piece semi assembled.
Including rail support props to prevent direct tension onto motor shaft |
| Chain drive system |
|
Strong durable steel chain |
| Toothed cable system |
|
Maintenance free, ultra quiet and patented toothed cable |
| Belt drive system |
|
Maintenance free, ultra quiet, steel reinforced toothed belt |
| Emergency release mechanism |
|
Yes |
| Integrated door security kit |
|
Mechanical carriage locking device (Qtr.
1 - 2007)
|
| Fitting |
|
Universal fitting for up-and-over and sectional doors |
| |
| Boom Type |
|
Rail length |
Overall length |
Carriage travel |
| Short boom |
|
2960 mm. |
3228 mm. |
2470 mm. |
| Medium boom |
|
3180 mm. |
3448 mm. |
2690 mm. |
| Long boom |
|
4090 mm. |
4358 mm. |
3600 mm. |
| Note: With KSY head the overall length is 6 mm. longer |
| |
| Boom Type (per Sep. 2006) |
|
Rail length |
Overall length |
Carriage travel |
| Short boom |
|
3080 mm. |
3448 mm. |
2590 mm. |
| Medium boom |
|
3330 mm. |
3598 mm. |
2840 mm. |
| Long boom |
|
4090 mm. |
4358 mm. |
3600 mm. |
| Note: With KSY head the overall length is 6 mm. longer |
All our products are CE certified. Relevant European Council Directives pertaining to electromagnetic compatibility
(89/336/EEC,