 |
|
Our new RCP02 power plug radio
control receives radio
telegrams from "learned"
radio transmitters and via the impulse output generates
an impulse with which an
electrical device (e.g. a garage door operator) can
be
triggered.
Available in addition
is a mains output which is not
switched.
Specifications |
| Coding |
Not necessary since the unit "learns" the
transmitter code. |
| Operating mode |
Impulse 1 second |
| Functions |
ON-OFF |
| Frequency |
868.30MHz. or 433.92MHz. |
| Power supply |
230 V AC/ 50 Hz |
| Plug system |
D, F/B, GB, CH |
| Max. contact rating |
|
|
Impulse output:
Mains output: |
Resistive
load:
Inductive load:
DC: |
5 A / 250 V AC
2 A / 250 V AC / coso 0,4
1 A / 24 V DC
6
A / 250 V AC |
| Current input |
approx. 30mA |
| Output |
Impulse output: 1 relay contact
(NO)
Mains output: Plug system specific to the respective country |
| Degree of protection |
IP 40 |
| Temp. range |
-10°C to +40°C |
| Dimensions |
approx. 120 x 50 x 75 mm (without
antenna) |
| Weight |
approx. 160g |
This product is approved to European standard EN 300220 and CE-certified. |
